Correlation between Boron Isotope of Coral Acropora and pH Value of Seawater Surface

A water circulation system with the almost same element composition and socket type was adopted in coral Acropora culture under different seawater pH value conditions and the data of the relationship between boron isotopic compositions of coral and seawater pH value by thermoelectric ionization mass spectrometer were obtained. According to the correlations between α_carb-3 of coral and the pH value of cultured seawater, α_carb-3 was not a constant but related to pH value, indicating that B(OH)₃ also incorporated carbonate. Therefore, the theoretical formula could not be used to calculate the seawater pH value from the δ¹¹B_carb value of the measured marine biological carbonate. The empirical equations obtained experimentally would be an alternative method to calculate the seawater pH value. In addition, the mixed precipitation of CaCO₃ and Mg(OH)₂ was found in aquaculture tanks with high pH value, and the δ¹¹B of the solid was significantly higher than that of cultured seawater. The result indicated that the presence of Mg(OH)₂ had a significant effect on the boron isotope fractionation, which deserved our attention.     

Binary Zinc Azides

Pure, solvent‐free Zn(N₃)₂ was prepared by reaction of diethyl zinc and hydrazoic acid in aprotic solvents. The single‐crystal structure determination, along with the comprehensive characterization of α‐Zn(N₃)₂ and two metastable polymorphs, could be achieved for the first time. Since these data disagree in large parts with the known, previously reported values, all previous syntheses of Zn(N₃)₂, and for comparison Zn(N₃)₂?2.5 H₂O and Zn(OH)N₃ were reinvestigated, indicating that some of the earlier work has to be revised.     

Modified layered bimetallic compound used as a novel adsorbent for the solid-phase extraction of monoaromatic hydrocarbons from water samples prior to gas chromatography–mass spectrometry

This study reports a promising method of solid-phase extraction for determining the toluene, ethylbenzene, p-xylene, m-xylene, o-xylene, 1,3,5-trimethylbenzene, and 1,2,4-trimethylbenzene in water samples by gas chromatography–mass spectrometry (GC–MS). Prior to this procedure, the magnesium–aluminum bimetallic hydroxides modified with sodium dodecylbenzenesulfonate (Mg/Al-SDBS-LDH) were prepared and served as the novel solid-phase extractant. The Mg/Al-SDBS-LDH has advantage of good hydrophobicity and larger spacing which facilitates the monoaromatic hydrocarbons (MAHCs) into the interlayer for adsorption. As a result, the seven MAHCs in 500 mL water samples were enriched greatly, and the theoretical enrichment factor reached to 125 times. Under the optimized conditions of solid-phase extraction (SPE) and GC–MS, the mass concentration of each MAHC (0.005–10, 0.01–10, or 0.05–10 ng/mL) had a fine linear relationship with peak area. The correlation coefficients were more than 0.995. The detection limits were between 0.001 and 0.01 ng/mL, and the RSD were between 3.1% and 6.6%. The method had been applied to determine the seven MAHCs in the Dongfengqu river water and laboratory wastewater of Chengdu University of Technology successfully.     

SCR performance enhancement of NiMnTi mixed oxides catalysts by regulating assembling methods of LDHs-Based precursor

A series of NiMnTi mixed metal oxides (Ni/Mn-TiO₂, Mn/NiTi-LDO and TiO₂/NiMn-LDO, NiMnTi-LDO) were synthesized via different assembling methods and evaluated in the selective catalytic reduction of NO_x with NH₃(NH₃-SCR). As the results presented, catalysts via diverse assembling methods of LDHs templates afforded different catalytic denitrification (DeNO_x) performance, which might be related to the exposure degree of active constituents and the interaction intensity between metal components. Noticeably, compared with Ni/Mn-TiO₂, Mn/NiTi-LDO and TiO₂/NiMn-LDO catalysts, the NiMnTi-LDO catalyst deriving from one step in-situ method NiMnTi-LDH precursor template exhibited the most desirable performance at temperature window of 150–360 °C in NH₃-SCR (above 90% NO_x conversion with 95% N₂ selectivity). The specific structure and property of samples were correlated by means of a series of characterizations, where the results indicated that NiMnTi-LDO possessed the highest surface area, the strongest redox ability, the most abundant acid amount and the best dispersion.     

玫瑰花状氢氧化钴的结构和浸润性

在没有任何表面活性剂条件下,通过简单的方法首次合成了玫瑰花状β-Co(OH)₂微晶。玫瑰花状β-Co(OH)₂微晶宽3~5μm,厚2~3μm,是由平均厚度为15nm的纳米片所组成。玫瑰花状β-Co(OH)₂组成的薄膜的接触角为158.5°±1.2°,表面处于任意的角度,水滴都不会滴落。     

非晶态镍硼酸盐结构的EXAFS研究

由摩尔比分别为1:2和1:8的NiCl₂·6H₂O和Na₂B₄O₇·10H₂O作为反应物, 合成两种非晶态镍硼酸盐, 同时通过水热法合成β-Ni(OH)₂. 化学分析和热重-微商热重法(TG-DTG)分析结果确定两种非晶态镍硼酸盐的分子组成分别为NiO·0.8B₂O₃·4.5H₂O和NiO·B₂O₃·3H₂O. 激光拉曼(Raman)实验结果表明镍硼酸盐样品中主要存在的硼氧阴离子为B₃O₃(OH)₅^2-和B₂O(OH)₆^2-. 同步辐射扩展X射线吸收精细结构(EXAFS)方法对样品进行结构解析, 通过数据拟合给出样品中Ni 原子周围近邻配位原子种类、配位数以及原子间距离. 用不同晶体结构作为标准对两种非晶态镍硼酸盐进行拟合的结果表明, 样品中Ni 原子周围局域结构与Ni₃B₂O₆晶体(ICSD No.31387)中的吻合较好. Ni 原子周围配位原子为O、B和Ni, 对于NiO·0.8B₂O₃·4.5H₂O, 配位数分别为5.7、3.8和3.8, 配位距离分别为0.208、0.263 和0.311 nm; 对于NiO·B₂O₃·3H₂O, 配位数分别为6.0、4.0 和4.0, 配位距离分别为0.207、0.262和0.310 nm.     

Zn/Al层状双氢氧化物-聚氯乙烯纳米复合物的制备与性能

用共沉淀法制备油酸钾改性的Zn2+、Al 3+层状双氢氧化物(Zn/Al-LDH),以环己酮为溶剂,用溶液插层法制备了Zn/Al层状双氢氧化物-聚氯乙烯(PVC)纳米复合物。采用傅里叶红外(FT-IR)、X-射线衍射(XRD)、透射电镜(TEM)对复合材料的结构及形貌进行了表征,并用热分析仪、万能试验机和紫外分光光度计研究了复合物的热稳定性能、拉伸性能和紫外吸收性能。结果表明:Zn/Al-LDH纳米片层无序分散在PVC基体中;Zn/Al-LDH对PVC低温时的骨干脱氯化氢有促进作用;与PVC膜相比,复合膜的分解温度降低,高温碳化温度升高,复合膜的拉伸强度及断裂伸长率得到提高,在300~380nm具有一定的紫外吸收性能。     

Real-time tracking of hydrogen peroxide secreted by live cells using MnO2 nanoparticles intercalated layered doubled hydroxide nanohybrids

We report a facile and green method for the fabrication of new type of electrocatalysts based on MnO₂ nanoparticles incorporated on MgAl LDH P-type semiconductive channel and explore its practical applications as high-performance electrode materials for electrochemical biosensor. A series of MgAl layered doubled hydroxide (LDH) nanohybrids with fixed Mg/Al (M²⁺/M³⁺ atomic ratio of 3) and varied amount of MnCl₂.4H₂O are fabricated by a facile co-precipitation method. This approach demonstrates the combination of distinct properties including excellent intercalation features of LDH for entrapping nanoparticles and high loading of MnO₂ nanoparticles in the host layers of LDH. Among all samples, Mn5–MgAl with 0.04% loaded manganese has a good crystalline morphology. A well-dispersed MnO₂ nanoparticles encapsulated into the host matrix of hydrotalcite exhibit enhanced electrocatalytic activity towards the reduction of H₂O₂ as well as excellent stability, selectivity and reproducibility due to synergistic effect of good catalytic ability of MnO₂ and conductive MgAl LDH. Glass carbon electrode (GCE) modified with Mn5–MgAl possesses a wide linear range of 0.05–78 mM, lowest detection limit 5 μM (S/N = 3) and detection sensitivity of 0.9352 μAmM⁻¹. This outstanding performance enables it to be used for real-time tracking of H₂O₂ secreted by live HeLa cells. This work may provide new insight in clinical diagnosis, on-site environmental analysis and point of care testing devices.     

臭氧氧化结合湿法喷淋对玻璃窑炉烟气同时脱硫脱硝实验研究

采用臭氧氧化结合湿法喷淋对模拟玻璃窑炉烟气开展了同时脱硫脱硝实验研究.采用不同溶液(NaOH、Na₂S)进行了喷淋实验.结果表明,保证溶液pH值在10以上,NaOH浓度对NO_x脱除效率无影响,SO₂的存在促进了NO_x吸收.当O₃/NO物质的量比为1.6、溶液NaOH浓度为0.5%时,NO_x脱除效率可达70%,SO₂脱除效率在99%以上.往喷淋液中添加Na₂S,NO_x脱除效率随Na₂S浓度增加而提高,SO₂的存在对NO_x脱除效率无影响.当O₃/NO物质的量比为1.2、溶液中NaOH浓度为0.5%、添加剂Na₂S浓度为0.6%时,NO_x脱除效率可达70%,SO₂脱除效率在95%以上.60 min长时间运行实验证明,模拟烟气中的NO_x经碱液和添加剂吸收后主要以NO^-₂的形式存在于喷淋液中,且NO_x脱除效率不随溶液pH值的变化而变化.     

Ferric Phosphate Hydroxide Microstructures Affect Their Magnetic Properties

Uniformly sized and shape-controlled nanoparticles are important due to their applications in catalysis, electrochemistry, ion exchange, molecular adsorption, and electronics. Several ferric phosphate hydroxide (Fe₄(OH)₃(PO₄)₃) microstructures were successfully prepared under hydrothermal conditions. Using controlled variations in the reaction conditions, such as reaction time, temperature, and amount of hexadecyltrimethylammonium bromide (CTAB), the crystals can be grown as almost perfect hyperbranched microcrystals at 180 °C (without CTAB) or relatively monodisperse particles at 220 °C (with CTAB). The large hyperbranched structure of Fe₄(OH)₃(PO₄)₃ with a size of ∼19 μm forms with the “fractal growth rule” and shows many branches. More importantly, the magnetic properties of these materials are directly correlated to their size and micro/nanostructure morphology. Interestingly, the blocking temperature (T_B) shows a dependence on size and shape, and a smaller size resulted in a lower T_B. These crystals are good examples that prove that physical and chemical properties of nano/microstructured materials are related to their structures, and the precise control of the morphology of such functional materials could allow for the control of their performance.